Destructive - Testing

Chemical Testing
PMI Testing
PMI Testing

Chemical Analysis

ITCPL has been providing expertise in the chemical analysis of metal & alloys. Our expert team of chemists & technicians boast of accurate chacterization & identification of elements as well as...

  • Analysis of Carbon & Sulphur by LECO method.
  • Spectro analysis of Iron base metals & alloys like carbon steel, low alloy steel, tool steel, austenitic stainless steel, ferritic stainless steel, martensitic stainless steel, duplex, Stainless steel, super duplex stainless steel, free cutting steels, etc.
  • Spectro analysis of Aluminium base metals & alloys.
  • Spectro analysis of copper base various metals & alloys like pure Copper, Brass, Bronze, Gunmetal, Cupro-Nickel, etc.
  • Spectro analysis of Nickel base metals & alloys like commercially Pure Nickel, Nickel-Copper alloys (Monel), Nickel-Chromium alloys, Nickel base super alloys, Nickel Fe-alloys, etc.
  • Wet analysis of ferrous metals & alloys.
  • Wet analysis of Ferro alloys.
  • Wet analysis of Aluminium, Nickel, Copper & Zinc base metals & alloys.
  • Wet analysis of white metals.
  • Positive material identification of various metals & alloys at site & at laboratory by XRF Method without C, S, P Si, Al analysis.
  • Positive material identification of various metals & alloys at site & at laboratory by OES Method with all elements using mobile spectrometer.

MECHANICAL TESTING

Our team of engineering experts has been providing precise mechanical testing of various metals & alloys along with elevation of results with national & international standards.

  • Tensile test at Room temperature.
  • Tensile test at high temperature up to 900°C.
  • Tensile test at low temperature up to -196°C.
  • Various bend tests like root bend, face bend, side bend, reverse bend, parent metal bend, double bend, re-bend.
  • Flattening, Flaring, Drift Expansion, Reverse flatting
  • Pullout test of mock up joints of tube-to-tube sheet joints
  • Cold crushing, Bulk density & Permanent linear change test of refractions
  • Charpy ‘V’ Notch Impact test (Room Temperature to -196°C)
  • Proof load of bolt
  • Wedge load of bolt
  • Full size braking of bolt and Shear test of bolt
  • Brinell Hardness / Rockwell Hardness /  Vickers Hardness
  • Micro Vickers Hardness
  • Tear test, Peel test and Wrap test
  • Macro test of welded sample and Nick break test
  • Fracture test
Chemical Testing
PMI Testing
Portable Spectro
Portable Spectro
Portable Spectro

METALLORGRAPHY TESTING

We provide metallographic sampling and evaluation of microstructures of metal & alloys for confirming the heat treatment conditions of metal, various phase identification to evaluate the detrimental phases in the metals impacting the desired application.

  • Microstructure Examination of parent metal to confirm heat treatment condition.
  • Microstructure Examination of welded samples.
  • Grain size Measurement, Inclusion Rating.
  • Decarburizing Depth Measurement.
  • Case depth measurement for Carburizing/Nitriding/Induction Hardened parts.
  • Coating thickness measurement.
  • Macro examinations of welded sample.
  • Macro examinations of forged sample.
  • Macro examinations of Rolled sample.
  • Graphite size, type & distribution in cast Irons.
  • Quantitative metallography to know the percentage of particular phase.
  • 0% ferrite in Duplex stainless steel.
  • Microstructure & Macrostructure Photography.
  • Replica Testing(In Situ-Metallography).
  • Fractography.
  • Jominy End Quench Test.

Civil Material Testing

ITPCL is also offered various testing services for civil engineering & infrastructure. Our Civil engineering lab is fully equipped to carry out various lab testing for sand, cement, bricks, reinforcement steel, Bitumen etc. & site services of NDT of concrete structure & load test of Pile foundations.

Fine Aggregates
  •  Gradation
  •  Bulk Density
  •  Soundness
  •  Water absorption capacity
  •  Silt content
  •  Relative Density
  •  Bulk modulus
  • Organic matter

Coarse Aggregates
  • Gradation
  • Bulk Density
  • Soundness
  • Water absorption capacity
  • Crushing Value
  • Abration value (LA method)
  • Flakiness
  • Elongation
  • Deleterious material /  Stripping value
  • Impact value
  • Grain size analysis by Sieve and Hydrometer Shriankage limit.
  • Atterberg’s limits. (liquid limit, plastic limit, plasticity index).
  • Proctor compaction test (Standard and Modified method).
  • Specific gravity.
  • Field dry density/ Field moisture content.
  • Free swell index.
  • Swell pressure of soil.
  • Unconfined compressive strength.
  • Laboratory Vane shear test.
  • Permeability of soil.
  • Box shear small and large.
  • Consolidation properties of soil.
  • C.B.R. Test, Triaxial Test (UU, CU, CD).
  • Chemical analysis (Sulphate, Chloride, pH).
  • Core Drilling (25 mm to 150 mm diameter size).
  • Load test on slabs and bridge deck, RCC floor.
  • Compressive strength of cubes by normal curing method.
  • Compressive strength of cubes by accelerated curing method.
  • Compressive strength of paver.
  • Blocks, curb stones, hollow blocks, mortar blocks, AAC blocks, etc.
  • Compressive strength.
  • Water absorption.
  • Flexural strength.
  • Acid resistance.
  •  Yield and Ultimate strength.
  •  Elongation
  •  Mass (kg/m)
  •  Bend & re-bend test
  • Marshal Stability Test for Bitumen.
  • Penetration test.
  • Consistency.
  • Setting time(initial and final).
  • Compressive strength (3 days, 7 days, 28 days).
  • Soundness.
  • Fineness.
Bulk Density Test of Coarse Aggregate
Bulk Density of Fine Aggragate
Impact Value Test of Aggregate
Flakiness Index Test of Aggregate
Initial Setting Time Test of Cement
Elongation Index test of Aggregate

Corrosion Testing

ITCPL We are providing corrosion testing expertise through our highly qualified & experienced team of chemists & metallurgists performing various corrosion tests & evaluation of results as per national & international standards e.g. NACE standard.​

  1. Intergranular Corrosion Test as per ASTM A-262.   
                           (Practice A, Practice B, Practice C, Practice D)
  2. Intergranular Corrosion Test as per ISO-3651.
                           (Practice A, Practice B, Practice C, Practice D)
  3. Hydrogen Induced Cracking Test (HIC).
  4. Sulphide Stress Corrosion Cracking test (SSCC).
  5. Chloride Stress Corrosion Cracking test (CSCC).
  6. Pitting Corrosion test (ASTM G-48 Method ‘A’).
  7. Crevice Corrosion test (ASTM G-48 Method ‘B’).
  8. Four Point Bend test as per NACE TM-0177.
  9. Corrosion test as per ASTM A-923 for detecting the detrimental phases.
  10. Salt Spray test.
  11. We can offer all above mentioned tests under allthird party inspection agencies.

Address

28, N.K.Industrial Park-1, Bakrol-Dhamatvan Road, Bakrol Bujrang, Ahmedabad – 382430 Gujarat, India

Contact Us

RT Departments :- +91 7573031701 & 7573031702
UT,MPT,DT Departments :- +91 7573031701

Scroll to Top